Large size Graphite Block

1.dimensions are available on request 2.bulk density:1.72g/cc 3.maximum grain size:0.8mm Grades:PSK,PSY,TSK,GSK

graphite block

Vibration-molded or extruded, carbonized and graphitized under precise technical control. High thermal and chemical resistance

Applications

1. Molds:  hot pressing molds, static casting molds, centrifugal casting molds, pressure  casting molds, fused refractory molds, etc.

2. Furnace parts:  resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc.

3. Anodes for the electrolysis of metals.

4. Cathodes in aluminum electrolysis cells.

5. Parts for heat exchangers.

6. Crucibles for melting and reduction.

7. Boats and trays for sintering.

Programmable properties

1. High thermal and chemical resistance

2. Good thermal conductivity

3. Low coefficient of thermal expansion

4. Minimal wettability to molten metals

Typical sizes

Diameter (mm)	630-1420
length (mm)	400-800

330x150x2200, 350x175x2100, 400x400x1800, 500x200x1800, 500x200x2500,

500x500x1800, 550x250x1800, 550x250x2500, 600x200x1800, 650x400x1800,

850x400x1800mm

* other dimensions are available on request.

Typical specifications

Specification	Unit	G1	G2	G3	G4
Bulk density                   (min)	g/cc	1.58	1.60	1.71	1.72
Specific resistance         (max)	micro ohm.m	10.0	9.0	8.5	8.5
Compressive strength      (min)	MPa	20	20	28	30
Bending strength             (min)	MPa	8	8	13	14
C.T.E. (100~600 degree) (max)	x10-6/degree	2.3	2.3	2.5	2.5
Maximum grain size	mm	4.0	2.0	2.0	0.8

*Note: The values mentioned in this table are only for reference and not committed to any contract

Contact:Doris Zhou

Dalian Thrive Mining Co., Ltd.

Tel: 86-411-84357743

Fax: 86-411-84342356

Large size Graphite Block